How to make a pea trellis tower

WP_20130602_006

Long time readers know this is not the my first attempt at making a sturdy pea trellis I have had posts and posts about this in the past.  Though those creations were a bit cheaper than my current version this one will not be falling down no matter how big those plants get.

First I started with a 4 foot by 8 foot cattle panel which ran me about $6 at Home Depot.

006

Given the panel had sharp edges and my largest vehicle is a pretty new minivan with leather seats I planned ahead and started the construction in the Home Depot parking lot.  Taking a piece of scrap lumber I placed it on the 5th cross section on one side and bent it up until it was perpendicular to the ground then repeated with the other side.

007

The I carefully placed the bent panel into my minivan and brought it home for the remaining construction which pretty much was adding a zip tie in the middle to make a isosceles triangle and then tucked both ends to interweave with the other open side of the tower.

028

Next I used some pliers to not have as many sharp pointy parts for my kids…probably more likely me to poke myself with and also filed down any ends that seemed overly sharp.

030

So I had a bit of a strategy for planting the peas, to know where to plant I placed my tower in the desired spot and wiggles it around to make and outline to plant my peas.  I removed it as you can see below and planted two rows of peas inside the perimeter.  Then in a few weeks I will plant peas on the outside of the tower.  The idea is the peas will grow and climb up the tower and have sunlight and adequate airflow to thrive.  Then the second crop will start to grow but by the time it starts to disturb the inside crop they will already be harvested.

026

I also planted peas on the outside of the tower now on the northern facing side of the tower since it wouldn’t get much sunlight after the interior had a head start.

027

I know a few of you are probably thinking, “Wow this is awesome for peas, but I bet this would make an real sturdy tomato tower and way better than the ones I can buy in the garden center.”  Which I would have to agree with you on that one large enough to provide good airflow and sturdy enough to support and fairly large tomato plant.

023

4 Responses to “How to make a pea trellis tower”

  1. DanO Says:

    I hope you have better luck than I have had. Where are you located in the US?


  2. The Cheap Vegetable Gardener Says:

    We are in the Pacific Northwest (Seattle area) peas are on of the crops that pretty much grow on their own here…mild temps, nice and rainy.


  3. Dennis Says:

    Great work, thank you for sharing. I live on the Central Oregon coast so our weather is somewhat similar to Seattle. Keep posting! You’re work is appreciated.


  4. How to make a tomato/cucumber cage - The Cheap Vegetable Gardener Says:

    […] cage and my pea tower…well they are the same thing and in my case I even reused my pea trellis tower to use with my cucumbers when my peas stopped producing.  So this is a great multi-tasker in […]


Leave a Reply

XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

IKE